GitHub Documentation

Welcome to Moonraker

You may have intended to navigate to one of Moonraker's front ends. If so, check that you entered the correct port in the address bar. If the front end is hosted on a default port (80 for http, 443 for https), you may remove the port from the address.

Authorization

Request IP:
216.73.217.100
Authorized:
False
CORS Enabled:
True

Status

Version:
v0.11.0-1-g1cfb0c4
Websocket Count:
0
Klipper State:
disconnected

Summary

Your device is not authorized to access Moonraker's API. This is normal if you intend to use API Key authentication or log in as an authenticated user. Otherwise you need to add your IP address to the 'trusted_clients' option in the [authorization] section of moonraker.conf.
CORS is enabled. Cross origin requests will be allowed for origins that match one of the patterns specified in the 'cors_domain' option of the [authorization] section.
Moonraker is not currently connected to Klipper. Make sure that the klipper service has successfully started and that its unix is enabled.

Warnings

[update_manager]: Failed to load extension mainsail-config: Invalid path for option `path` in section [update_manager mainsail-config]: Path `/opt/printer_data/mainsail-config` does not exist
[update_manager]: Failed to load extension klipper_tmc_autotune: Invalid path for option `path` in section [update_manager klipper_tmc_autotune]: Path `/opt/printer_data/klipper_tmc_autotune` does not exist
[update_manager]: Failed to load extension klipper_auto_speed: Invalid path for option `path` in section [update_manager klipper_auto_speed]: Path `/opt/printer_data/klipper_auto_speed` does not exist
[update_manager]: Failed to load extension Klipper-Adaptive-Meshing-Purging: Invalid path for option `path` in section [update_manager Klipper-Adaptive-Meshing-Purging]: Path `/opt/printer_data/Klipper-Adaptive-Meshing-Purging` does not exist
Unparsed config option 'managed_services: klipper' detected in section [update_manager mainsail-config]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'origin: https://github.com/mainsail-crew/mainsail-config.git' detected in section [update_manager mainsail-config]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'primary_branch: master' detected in section [update_manager mainsail-config]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'origin: https://github.com/andrewmcgr/klipper_tmc_autotune.git' detected in section [update_manager klipper_tmc_autotune]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'managed_services: klipper' detected in section [update_manager klipper_tmc_autotune]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'primary_branch: main' detected in section [update_manager klipper_tmc_autotune]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'install_script: install.sh' detected in section [update_manager klipper_tmc_autotune]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'origin: https://github.com/anonoei/klipper_auto_speed.git' detected in section [update_manager klipper_auto_speed]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'primary_branch: main' detected in section [update_manager klipper_auto_speed]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'install_script: install.sh' detected in section [update_manager klipper_auto_speed]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'managed_services: klipper' detected in section [update_manager klipper_auto_speed]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'origin: https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging.git' detected in section [update_manager Klipper-Adaptive-Meshing-Purging]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'managed_services: klipper' detected in section [update_manager Klipper-Adaptive-Meshing-Purging]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.
Unparsed config option 'primary_branch: main' detected in section [update_manager Klipper-Adaptive-Meshing-Purging]. This may be an option no longer available or could be the result of a module that failed to load. In the future this will result in a startup error.